HI-CAP
WELL-X-TROL
AMTROL'S SHOWROOM
Welcome to Amtrol's Virtual Showroom at Smithfield Plumbing & Heating Supply. Amtrol carries indirect water heating systems. Please call, fax or email us for more information on Amtrol products. If you have any questions or need more information please contact us at: phone 401-949-0110, fax:401-949-0059, or email: PLUMSUPPLY@aol.com. Thank you.
Water Well Tanks
The Professional's choice is water well tanks since 1963
WELL-X-TROL
The WELL-X-TROL concept of a pre-pressurized, sealed-in air charge in a well tank was originated by Amtrol in 1963. WELL-X-TROL is designed to keep pump starts to a minimum, which increase pump life and saves energy. Its FDA compliance, NSF listed, non-metallic water reservoir prevents water from touching metal, eliminating the possibility of corrosion. WELL-X-TROL's unique diaphragm design sells in an air charge, separating air from water which eliminates the need for an air volume control. Over a quarter century pf proven use gives it the longest record of service in the industry. With over 10 million installed and operating throughout the world, WELL-X-TROL is clearly the professional's choice.
HI-CAP
WELL-X-TROL
Amtrol's line of HI-CAP WELL-X-TROL tank/switch combos puts you in control of pressures and drawdowns. The perfect answer for maximum drawdown. You decide how much drawdown is needed and set the HI-CAP pressure switch accordingly. Up to 46 gallons for 302/350 HI-CAPS, or up to 370 gallons in the 420 Series.
PRO ACCESS SERIES
The new PRO Accesses Series features a stainless steel connection piped through the stand. Designed with the professional in mind, PRO Access ensures a watertight connection under the tank and eliminates the need for a long tank tee, saving labor and materials.
WX-105-PS
The WX-105-PS Tank was designed to accommodate jet pumps of all kinds. This horizontal 20 liter (5.3 gallons) tank when combined with a jet pump is ideal for use in tight spaces such as in cottages, as well as for pressure boosting, irrigation, and general all-around residential use.
WX-205
The low profile WX-205 allows maximum drawdown in a low silhouette tank profile. Ideal for crawl spaces and other limited head room installations. It has 100% maximum acceptance, is only 29 1/2 inches high. and has a 1 1/4 inch system connection
OC Series
The Off-Set Connector Series (OC) features a universal pump mount bracket and off-set system connection for easy installation of a pump and tank package.
Thermal Expansion Absorbers
THERM-X-TROL ST Series
Diaphragm-type, Pre-Pressurized Expansion Tanks Specifically Designed for Potable Hot Water Systems.
Features & Benefits: * Eliminates Relief Valve Spillage *Controls Pressure Build-Up * Protects Plumbing Fixtures * Smothers Water Hammer * Extends Water Heater Life * Eliminates Hot Water Waste * Requires No Maintenance * Unlimited Applications.
Pressurizer
Many homeowners think they have to live with inadequate water pressure. Now they have an easy, affordable solution. The pre-packaged Pressurizer system is perfect for single and multi family homes where space is at a minimum. Designed with both the installer and consumer in mine, The RP Series is available in four sizes to fit virtually any application.
RP-25
- Used for a large home. The boost pressure is 55 psig and the pump size is 3/4
HP.
RP-15 - Used for a large home. The boost pressure is 40 psig and the pump size is 1/2 HP.
RP-10 - Used for an average-sized home. The boost pressure is 40 psig and the pump size is 1/2 HP.
RP-5 - Used for a small home. The boost pressure is 40 psig and the pump size is 1/2 HP.
Commercial Hot Water Maker
Boiler Mate Series
The Boiler Mate Series commercial Hot Water design combines rapid, highly efficient recovery with a unique thermal storage system. Meets today's commercial and institutional hot water demands with minimum energy requirements. Sized and applied to meet "real water" building demands, rather than traditional "fixture unit" theoretical demands, the Hot Water system dramatically slashes the cost of providing hot water to the commercial, institutional or industrial building.
Model
WH-7C - Capacity of 41 gallons, cold water inlet of 3/4"
NPTF, hot water outlet at 3/4" NPTF, Boiler supply 1" NPTM, Boiler
return 1" NPTM, and drain 3/4" NPT.
Model WH-10C - Capacity of 80 gallons, cold water inlet 1" NPTM, hot water outlet 1" NPTM, boiler supply 1" NPTM, and boiler return 1" NPTM.
EXTROL & FILL-TROL SYSTEMS
Pre-pressurized, diaphragm-type expansion tanks and air eliminator accessories for positive control of: (a) system pressure, (b) hot water expansion, (c) filling, and (d) expulsion of system air.
Extrol
For Hot Water Expansion in Closed Heating Systems. The Extrol tank is a uniquely engineered, diaphragm-type expansion tank that is pre-pressurized with a standard charge of 12 p.s.i. The Extrol is of welded-steel construction and its diaphragm is a rugged, flexible, long-life material that keeps system water and air separate.
Fill-Trol
Fill-Trol provides added filling control to the benefits of the Extrol systems. The Amtrol Fill-Trol system consists of a specially adapted Extrol pre-pressurized, diaphram-type expansion tank, and the Fill-Trol - a specially designed automatic pressure reducing fill valve. It is factory pre-charged to 12 psig.
Thank you for viewing AMTROL'S virtual showroom at smithfieldsupply.com. There are many more products that we can offer you through Amtrol that may not be on the website. We have the spec sheets for all our products, please do not hesitate to call for more information on any product in our website. Please call (401.949.0110), fax (401.949.0059) or email (PLUMSUPPLY@aol.com) for more information. Thank you!
Go back to Smithfield
Supply's Homepage, click here: 